Sval Gelato and Coffee is a small establishment in Kristiansand, Norway. It is beloved, not only for its delicious gelato but also for its coffee, cookies, and sandwiches.
Like most restaurants, Sval must adhere to regulations that require careful storage and preservation of food. These regulations require monitoring the temperature of each cold storage unit and entering the information into a log.
In the past, Sval’s staff members observed and logged the data manually. Maintaining a constant, cool temperature is essential for consumers' health and safety, preserving food safely and counteracting the growth of microorganisms. And for a gelato business, maintaining temperatures in cold storage is essential for success.
However, manual monitoring of the temperature in cold storage units day and night was not possible. This quickly became a problem for Sval.
Deep freezers and cold storage units usually do not break in an instant. They deteriorate slowly, which can result in spoiled food before anyone is aware of the problem. Damage can happen when equipment is working properly. The temperature can rise to a critical level by accident. An employee may have left a door ajar. Or, someone may have bumped into the power button, thus turning it off.
With manual monitoring, you not only need to be good, but you need to be lucky. An unnoticed equipment failure or human error can cost you the contents of your freezer, resulting in wasted labor and thousands of dollars lost in raw materials.
At Sval, despite devotion to monitoring temperatures, management could not observe changes outside of business hours. Whether because of equipment failure or human mistakes, temperature changes occurred several times. Because these temperatures changes went unnoticed, the coffee shop had to throw out food, which resulted in a loss in sales and unnecessary food waste.
The owners of Sval decided they needed to find an innovative solution to ensure this waste never happened again.
Fortunately, they found an affordable answer. To increase efficiency, reduce losses, and eliminate the manual routine for reading temperatures in cold storage units, the owners of Sval decided to install Tmesh-log.
Tmesh-log is a smart solution for temperature measurement. It uses new sensor technology to automatically report and log temperature readings. With continuous monitoring of temperatures, employees can spend less time on manual work and more on core business functions.
At Sval, the solution required placing sensors in cold storage units and connecting them to the cloud. Tmesh-log monitored the units, making sure they were within the right temperature range.
Managers could use the Tmesh app to see the temperatures at any time. They had access to report deviations and could look at historical data. When the Food Safety Authority visited, they could present daily reports and show how they handled temperature changes.
Setup at Sval took no more than a few minutes. Because sensor batteries last more than a decade, the team could be sure they would not need to replace them for a long time. Managers found the data accurate and appreciated that the sensors' high-quality signal was independent of the coffee shop's internet connection.
Because of Tmesh-log and the innovative sensor technology, management and employees at Sval found four significant temperature changes within two months of implementation and intervened to prevent major losses. Each incident would have cost the small coffee shop 20,000 NOK (approximately 2,300 USD) in food waste and would have had a significant impact on sales. This equates to nearly 60,000 USD a year in savings.
Nora Pedersen / Owner and general manager, Sval.
Because the managers and employees at Sval found a reliable response to their issues monitoring cold storage units, they could focus on their true passion: creating great food. Tmesh was the cost-efficient solution, which they had been looking for.
With little technical knowledge necessary to use the solution, the team found it effortless to use and a valuable resource to preserve their delicious gelato.
Sensors used to be bulky, complex and often inaccurate. We've completely rethought sensor design to enable data collection anywhere and everywhere. There's no need to "rip and replace" legacy systems to turn them into "smart" equipment.
Learn more about how sensor technology can improve efficiency and reduce waste in your restaurant or store.
You might also like our other case studies:
Follow this blog for a peek of our future!
* By subscribing to our newsletter, you agree to receive digital communications. You may withdraw this consent at any time.
In healthcare, patient safety is paramount. However, safety is often jeopardized by labor-intensive systems...
In every building with a water system, pipes need to be actively monitored to reduce waterborne pathogen..
A flexible workspace of 2,741 sq. meter in London aimed to create a progressive urban experience for its..